Put Excursion on your shortlist if…
Its 4 adults capacity fits the people who will use it. The layout and features below match your routine, and you have room for the complete installation.
01 / 04Manufacturer photography. Finishes and equipment shown may vary by model year. These photos do not indicate current showroom stock.
Hot Spring · Freeflow Collection
Excursion
A little getaway, a few steps from the door.
The Excursion pairs a lounge seat with three upright seats and 33 jets. Its square footprint gives you the same exterior dimensions as the Monterey with a different seating arrangement.
- Seating
- 4 adults
- Layout
- Lounge seating
- Dimensions
- 78" × 78" × 34"
Get current Excursion pricing.
We’ll confirm the model year, finish, available options and delivery scope for your home.
Get Excursion PricingCan I see one locally? ↓Ask our showroom team to confirm current stock, display models and demonstration availability.
Find your fit
Start with how
you’ll use the space.
Start with the people who will use it most often. Try seat depth, legroom and the way each massage position meets your back.
Compare another option if…
A larger seating number does not always mean a better fit. Compare an open layout with a lounge seat, then check the room left for the cover and entry.
Compare hot tub collections →
Take a closer look
Pick your spot. Then try another one.
01
Excursion: find your everyday seat.
The manufacturer lists 4 adults with lounge seating. Try the seat depth, footroom and entry before choosing by a capacity number alone.
The details that affect your decision
Excursion, at a glance.
Manufacturer specifications. Confirm the exact model year before planning installation.
- Seating
- 4 adults
- Layout
- Lounge seating
- Jets
- 33
- Dimensions
- 78" × 78" × 34"
- Water Capacity
- 250 gal
- Weight (Dry)
- 390 lb
- Weight (Filled)
- 3,175 lb
- Electrical
- 115 V Plug-N-Play; 230 V convertible
- Pumps
- One 2-speed, 1.5 HP pump
- Filter
- 50 sq ft
- Water Care
- FROG sanitizing system ready
- Insulation
- Spray-in full foam
- Heater
- 1,000 W at 115 V; 4,000 W at 230 V
- Controls
- LCD control panel
Dimensions describe the equipment, not the complete installation area. Required clearances, cover movement, ventilation and access depend on the exact model and site. See the manufacturer’s guide for filled-weight assumptions and installation requirements.
About these specifications and photographs
Manufacturer information checked 2026-09-23. Confirm the actual unit, options and model year in your quote. Photographs are representative manufacturer images, not a live inventory record.
What to look at on the Excursion.
- Four seats including a lounge
- 33 jets across the seating positions
- Waterfall and multicolor footwell light
- Full-foam insulation
- 115 V Plug-N-Play; convertible to 230 V
Ownership, explained
Clear water still needs a routine.
Choose equipment you understand and a routine you will keep. Your local team can walk through both before delivery.
Understand your water-care system.
Ask which system is included on the exact unit, which equipment is optional and what regular supplies it needs.
Learn the regular checks.
Follow the model’s instructions for testing, water balance and filter care. Add those checks to a routine you can keep.
Start with an owner orientation.
We explain the controls, cover and water care at setup. Your local team remains a place to ask questions afterward.
Before delivery
Make room for
more than the water.
Start with a photo and measurements of your space. The exact model’s guide and a property assessment resolve the details.
A suitable base
Plan a level, supported surface for the filled load. A deck or elevated installation needs a qualified assessment.
A clear route
Check gates, corners, overhead obstacles and the final placement. Identify any crane or special-access needs before committing.
Power and room to use it
Have a qualified electrician confirm the exact unit’s requirements. Allow for the cover, safe entry and service-panel access.
Excursion · equipment dimensions
78" × 78" × 34"See it with your local team
Ask about Excursion
before you make the drive.
Tell us what you’re comparing. We’ll confirm the location, display options and whether a demonstration is available for the model you want to try.
Tyler
4428 Old Jacksonville Hwy
Tyler, TX 75703
Monday–Saturday: 10am – 6pm
Sunday: Closed
View Tyler showroom →Longview
414 W Loop 281 Ste 1
Longview, TX 75605
Monday: By appointment only
Tuesday–Friday: 10am – 6pm
Saturday: 10am – 3pm
Closed the last Saturday of each month
Sunday: Closed
View Longview showroom →
Your local team, at the Tyler showroom.
Your written quote
Know what comes with it.
The purchase should explain the equipment and the work around it.
The exact Excursion
Model year, finish, included equipment, selected options and the availability of the specific unit.
Delivery and setup
Delivery, placement, setup and orientation stated in the quoted total. Crane needs, electrical work, site preparation and removal are identified separately before commitment.
Care after delivery
The applicable manufacturer warranty and local service terms. Ask what is covered, what maintenance is required and how to request help.
Meet your service options →From first question to everyday use
Know what happens next.
- 01
Find your fit.
Compare the features you will use, the space you have and current model options. Confirm any demonstration before your visit.
- 02
Check your space.
Review the base, delivery route, power and room for everyday care. A site conversation or backyard visit helps resolve the unknowns.
- 03
See it in writing.
Your quote explains delivery and setup, what is included and any additional work your property requires.
- 04
Get comfortable.
Coordinate delivery and owner orientation. Come back to your local team for care guidance and service support.
Before you decide.
Is the Excursion available in Tyler or Longview?
Our team confirms current availability, the exact model year and where you can see a Excursion. A model page does not mean that unit is in stock, on display or ready for a demonstration.
Can I get Excursion pricing before visiting?
Yes. Request current pricing directly. We will confirm the configuration and payment options first, and explain which property details are still needed for the delivery scope.
What do I need to prepare for the Excursion?
Start with the exact unit’s installation or pre-delivery guide. Check support, access, electrical requirements and clearances with the appropriate qualified professionals before preparing the site.
What will my written quote include?
Your written quote explains delivery, placement, setup and orientation in the quoted total. Crane needs, difficult access, electrical work, site preparation and old-unit removal are identified separately before you commit.
Who helps after delivery?
Your local ETHT team helps with owner orientation, care questions and service coordination. Ask for the manufacturer warranty for the exact model year and an explanation of any applicable local service terms.
Can specifications change between model years?
Yes. Use the exact model year and configuration when comparing dimensions, equipment and installation requirements. Representative manufacturer photography can show a different finish or optional equipment.
Honest pricing. No pressure.
Get my Excursion quote
Our local team follows up with current model and payment options during showroom hours.
Prefer the full quote form? Continue with Excursion selected →
Start with a conversation
Could this be
your everyday spot?
Tell us about your space and who will use it. We’ll help you compare the Excursion and put the next steps in writing.
Get Excursion PricingManufacturer lifestyle photography, not an ETHT customer installation.