Put 532L on your shortlist if…
Its 3 adults capacity fits the people who will use it. The layout and features below match your routine, and you have room for the complete installation.
01 / 03Manufacturer photography. Finishes and equipment shown may vary by model year. These photos do not indicate current showroom stock.
Watkins Wellness · Special Edition
532L
A little room to stretch out.
The 532L puts a lounge and two upright seats in a rectangular, 66-inch by 84-inch footprint. Its 32 jets and convertible electrical configuration make it an option for a smaller soaking group comparing seat fit and the power available at home.
- Seating
- 3 adults
- Layout
- Lounge seating
- Dimensions
- 66" × 84" × 34"
Get current 532L pricing.
We’ll confirm the model year, finish, available options and delivery scope for your home.
Get 532L PricingCan I see one locally? ↓Ask our showroom team to confirm current stock, display models and demonstration availability.
Find your fit
Start with how
you’ll use the space.
Start with the people who will use it most often. Try seat depth, legroom and the way each massage position meets your back.
Compare another option if…
A larger seating number does not always mean a better fit. Compare an open layout with a lounge seat, then check the room left for the cover and entry.
Compare hot tub collections →
Take a closer look
Pick your spot. Then try another one.
01
532L: find your everyday seat.
The manufacturer lists 3 adults with lounge seating. Try the seat depth, footroom and entry before choosing by a capacity number alone.
The details that affect your decision
532L, at a glance.
Manufacturer specifications. Confirm the exact model year before planning installation.
- Seating
- 3 adults
- Layout
- Lounge seating
- Jets
- 32
- Dimensions
- 66" × 84" × 34"
- Water Capacity
- 217 gal
- Weight (Dry)
- 582 lb
- Electrical
- 115 V / 15 A; convertible to 230 V / 50 A
- Pumps
- One two-speed pump
- Filter
- 50 sq ft
- Heater
- 1,000 W at 115 V; 4,000 W at 230 V
- Lighting
- 12 multicolor LED points of light
- Water Care
- Ozone system; sanitizer and regular water care still required
- Insulation
- FiberCor
- Cover
- Included; cover lifter and steps are optional
- Published specification revision
- 2026 owner manual; 2025 Rev A spec sheet
- Limited Warranty
- 5 years structure; 2 years shell/surface water loss; 1 year plumbing, electrical/mechanical components and synthetic cabinet
Dimensions describe the equipment, not the complete installation area. Required clearances, cover movement, ventilation and access depend on the exact model and site. See the manufacturer’s guide for filled-weight assumptions and installation requirements.
Specifications use the 2026 Watkins owner manual and the 2025 manufacturer specification sheet. These are document revisions, not a promise of the quoted unit's model year. Confirm the exact unit, installation guide, warranty certificate and options before preparing your site.
Manufacturer installation / specification guide ↗About these specifications and photographs
Manufacturer information checked 2026-10-04. Confirm the actual unit, options and model year in your quote. Photographs are representative manufacturer images, not a live inventory record.
Manufacturer photographs show representative finishes, not the individual inventory unit. Confirm the selected finish, equipment and model revision on your quote.
Published document revisions identify the sources, not the build year of a specific unit. Exact inventory build years have not been verified.
Water capacity and dry weight follow the owner manual; jets and equipment follow the matching manufacturer specification sheet. Earlier manufacturer sheets may list different weights or capacities.
Ozone supplements water care; it does not replace sanitizer, water testing or filter maintenance.
Limited warranty summary reviewed against Watkins certificate 63779 Rev B, October 2025, for 532L/772/772L.
Warranty eligibility and the applicable certificate must be confirmed for the exact new unit. Coverage is for the original purchaser, starts at installation no later than one year after purchase, and terminates on ownership transfer. Cosmetic damage and normal wear are excluded; travel/service charges may apply.
At 115 V the heater operates with the jet pump on low speed; 230 V conversion changes heater operation and requires qualified electrical work.
What to look at on the 532L.
- Three seats including a lounge, with 32 jets
- 115 V / 15 A operation; convertible to 230 V / 50 A
- One two-speed jet pump
- 12 multicolor LED points of light
- FiberCor insulation and an included cover
Ownership, explained
Clear water still needs a routine.
Choose equipment you understand and a routine you will keep. Your local team can walk through both before delivery.
Understand your water-care system.
Ask which system is included on the exact unit, which equipment is optional and what regular supplies it needs.
Learn the regular checks.
Follow the model’s instructions for testing, water balance and filter care. Add those checks to a routine you can keep.
Start with an owner orientation.
We explain the controls, cover and water care at setup. Your local team remains a place to ask questions afterward.
Before delivery
Make room for
more than the water.
Start with a photo and measurements of your space. The exact model’s guide and a property assessment resolve the details.
A suitable base
Plan a level, supported surface for the filled load. A deck or elevated installation needs a qualified assessment.
A clear route
Check gates, corners, overhead obstacles and the final placement. Identify any crane or special-access needs before committing.
Power and room to use it
Have a qualified electrician confirm the exact unit’s requirements. Allow for the cover, safe entry and service-panel access.
532L · equipment dimensions
66" × 84" × 34"See it with your local team
Ask about 532L
before you make the drive.
Tell us what you’re comparing. We’ll confirm the location, display options and whether a demonstration is available for the model you want to try.
Tyler
4428 Old Jacksonville Hwy
Tyler, TX 75703
Monday–Saturday: 10am – 6pm
Sunday: Closed
View Tyler showroom →Longview
414 W Loop 281 Ste 1
Longview, TX 75605
Monday: By appointment only
Tuesday–Friday: 10am – 6pm
Saturday: 10am – 3pm
Closed the last Saturday of each month
Sunday: Closed
View Longview showroom →
Your local team, at the Tyler showroom.
Your written quote
Know what comes with it.
The purchase should explain the equipment and the work around it.
The exact 532L
Model year, finish, included equipment, selected options and the availability of the specific unit.
Delivery and setup
Delivery, placement, setup and orientation stated in the quoted total. Crane needs, electrical work, site preparation and removal are identified separately before commitment.
Care after delivery
The applicable manufacturer warranty and local service terms. Ask what is covered, what maintenance is required and how to request help.
Meet your service options →From first question to everyday use
Know what happens next.
- 01
Find your fit.
Compare the features you will use, the space you have and current model options. Confirm any demonstration before your visit.
- 02
Check your space.
Review the base, delivery route, power and room for everyday care. A site conversation or backyard visit helps resolve the unknowns.
- 03
See it in writing.
Your quote explains delivery and setup, what is included and any additional work your property requires.
- 04
Get comfortable.
Coordinate delivery and owner orientation. Come back to your local team for care guidance and service support.
Before you decide.
Is the 532L available in Tyler or Longview?
Our team confirms current availability, the exact model year and where you can see a 532L. A model page does not mean that unit is in stock, on display or ready for a demonstration.
Can I get 532L pricing before visiting?
Yes. Request current pricing directly. We will confirm the configuration and payment options first, and explain which property details are still needed for the delivery scope.
What do I need to prepare for the 532L?
Start with the exact unit’s installation or pre-delivery guide. Check support, access, electrical requirements and clearances with the appropriate qualified professionals before preparing the site.
What will my written quote include?
Your written quote explains delivery, placement, setup and orientation in the quoted total. Crane needs, difficult access, electrical work, site preparation and old-unit removal are identified separately before you commit.
Who helps after delivery?
Your local ETHT team helps with owner orientation, care questions and service coordination. Ask for the manufacturer warranty for the exact model year and an explanation of any applicable local service terms.
Can specifications change between model years?
Yes. Use the exact model year and configuration when comparing dimensions, equipment and installation requirements. Representative manufacturer photography can show a different finish or optional equipment.
Honest pricing. No pressure.
Get my 532L quote
Our local team follows up with current model and payment options during showroom hours.
Prefer the full quote form? Continue with 532L selected →