Skip to main content
TYLER + LONGVIEW SHOWROOMS →

Watkins Wellness · Special Edition

735

Make room for the whole conversation.

The 735 has seven upright seats and 35 jets in a 7-foot square footprint. Choose it for your shortlist when you want open seating rather than a lounge, then compare the seat depths, footroom and entry with your usual soaking group.

Seating
7 adults
Layout
Open seating
Dimensions
84" × 84" × 36"

Get current 735 pricing.

We’ll confirm the model year, finish, available options and delivery scope for your home.

Get 735 PricingCan I see one locally? ↓

Ask our showroom team to confirm current stock, display models and demonstration availability.

Find your fit

Start with how
you’ll use the space.

Start with the people who will use it most often. Try seat depth, legroom and the way each massage position meets your back.

Put 735 on your shortlist if…

Its 7 adults capacity fits the people who will use it. The layout and features below match your routine, and you have room for the complete installation.

Compare another option if…

A larger seating number does not always mean a better fit. Compare an open layout with a lounge seat, then check the room left for the cover and entry.

Compare hot tub collections →
Watkins 735 overhead view showing its open seating and jets
Manufacturer layout photograph

Take a closer look

Pick your spot. Then try another one.

01

735: find your everyday seat.

The manufacturer lists 7 adults with open seating. Try the seat depth, footroom and entry before choosing by a capacity number alone.

The details that affect your decision

735, at a glance.

Manufacturer specifications. Confirm the exact model year before planning installation.

Manufacturer specifications ↗
Seating
7 adults
Layout
Open seating
Jets
35
Dimensions
84" × 84" × 36"
Water Capacity
355 gal
Weight (Dry)
835 lb
Weight (Filled)
5,020 lb
Electrical
230 V / 50 A dedicated GFCI-protected circuit
Pumps
Two pumps: one two-speed and one one-speed
Filter
30 sq ft
Heater
4,000 W at 230 V
Lighting
10 multicolor LED points of light
Water Care
Optional ozone system; sanitizer and regular water care required
Insulation
FiberCor
Cover
Included; cover lifter and steps are optional
Published specification revision
2024 owner manual; 2023 Rev A spec sheet
Limited Warranty
5 years structure; 2 years shell/surface water loss; 1 year plumbing, electrical/mechanical components and synthetic cabinet

Dimensions describe the equipment, not the complete installation area. Required clearances, cover movement, ventilation and access depend on the exact model and site. See the manufacturer’s guide for filled-weight assumptions and installation requirements.

Specifications use the 2024 Watkins owner manual and the 2023 manufacturer specification sheet. These are document revisions, not a promise of the quoted unit's model year. Confirm the exact unit, installation guide, warranty certificate and options before preparing your site.

Manufacturer installation / specification guide ↗
About these specifications and photographs

Manufacturer information checked 2026-10-04. Confirm the actual unit, options and model year in your quote. Photographs are representative manufacturer images, not a live inventory record.

Manufacturer photographs show representative finishes, not the individual inventory unit. Confirm the selected finish, equipment and model revision on your quote.

Published document revisions identify the sources, not the build year of a specific unit. Exact inventory build years have not been verified.

Water capacity and dry weight follow the owner manual; jets and equipment follow the matching manufacturer specification sheet. Earlier manufacturer sheets may list different weights or capacities.

Ozone supplements water care; it does not replace sanitizer, water testing or filter maintenance.

Limited warranty summary reviewed against Watkins certificate 63708 Rev B, December 2024, for 735/735L.

Warranty eligibility and the applicable certificate must be confirmed for the exact new unit. Coverage is for the original purchaser, starts at installation no later than one year after purchase, and terminates on ownership transfer. Cosmetic damage and normal wear are excluded; travel/service charges may apply.

Published filled weight includes water and occupants at 175 lb per seat. Use the exact unit guide and a qualified professional to assess support.

What to look at on the 735.

  • Seven upright seats with 35 jets
  • Two jet pumps
  • Water feature and 10 multicolor LED points of light
  • FiberCor insulation and an included cover
  • 230 V / 50 A dedicated electrical supply

Ownership, explained

Clear water still needs a routine.

Choose equipment you understand and a routine you will keep. Your local team can walk through both before delivery.

Understand your water-care system.

Ask which system is included on the exact unit, which equipment is optional and what regular supplies it needs.

Learn the regular checks.

Follow the model’s instructions for testing, water balance and filter care. Add those checks to a routine you can keep.

Start with an owner orientation.

We explain the controls, cover and water care at setup. Your local team remains a place to ask questions afterward.

Before delivery

Make room for
more than the water.

Start with a photo and measurements of your space. The exact model’s guide and a property assessment resolve the details.

  1. A suitable base

    Plan a level, supported surface for the filled load. A deck or elevated installation needs a qualified assessment.

  2. A clear route

    Check gates, corners, overhead obstacles and the final placement. Identify any crane or special-access needs before committing.

  3. Power and room to use it

    Have a qualified electrician confirm the exact unit’s requirements. Allow for the cover, safe entry and service-panel access.

Help plan my space

735 · equipment dimensions

Watkins 735 overhead view showing its open seating and jets84" × 84" × 36"
Equipment only. Additional space is needed for entry, care and installation. This is not a construction drawing.

See it with your local team

Ask about 735
before you make the drive.

Tell us what you’re comparing. We’ll confirm the location, display options and whether a demonstration is available for the model you want to try.

Longview

414 W Loop 281 Ste 1
Longview, TX 75605

Monday: By appointment only

Tuesday–Friday: 10am – 6pm

Saturday: 10am – 3pm

Closed the last Saturday of each month

Sunday: Closed

View Longview showroom →
Ask about a 735 visit
Zach Glaske, Sales Manager, at the East Texas Hot Tub Tyler showroom
Zach Glaske · Sales Manager
Your local team, at the Tyler showroom.

Your written quote

Know what comes with it.

The purchase should explain the equipment and the work around it.

The exact 735

Model year, finish, included equipment, selected options and the availability of the specific unit.

Delivery and setup

Delivery, placement, setup and orientation stated in the quoted total. Crane needs, electrical work, site preparation and removal are identified separately before commitment.

Care after delivery

The applicable manufacturer warranty and local service terms. Ask what is covered, what maintenance is required and how to request help.

Meet your service options →

From first question to everyday use

Know what happens next.

  1. 01

    Find your fit.

    Compare the features you will use, the space you have and current model options. Confirm any demonstration before your visit.

  2. 02

    Check your space.

    Review the base, delivery route, power and room for everyday care. A site conversation or backyard visit helps resolve the unknowns.

  3. 03

    See it in writing.

    Your quote explains delivery and setup, what is included and any additional work your property requires.

  4. 04

    Get comfortable.

    Coordinate delivery and owner orientation. Come back to your local team for care guidance and service support.

Before you decide.

Is the 735 available in Tyler or Longview?

Our team confirms current availability, the exact model year and where you can see a 735. A model page does not mean that unit is in stock, on display or ready for a demonstration.

Can I get 735 pricing before visiting?

Yes. Request current pricing directly. We will confirm the configuration and payment options first, and explain which property details are still needed for the delivery scope.

What do I need to prepare for the 735?

Start with the exact unit’s installation or pre-delivery guide. Check support, access, electrical requirements and clearances with the appropriate qualified professionals before preparing the site.

What will my written quote include?

Your written quote explains delivery, placement, setup and orientation in the quoted total. Crane needs, difficult access, electrical work, site preparation and old-unit removal are identified separately before you commit.

Who helps after delivery?

Your local ETHT team helps with owner orientation, care questions and service coordination. Ask for the manufacturer warranty for the exact model year and an explanation of any applicable local service terms.

Can specifications change between model years?

Yes. Use the exact model year and configuration when comparing dimensions, equipment and installation requirements. Representative manufacturer photography can show a different finish or optional equipment.

Honest pricing. No pressure.

Get my 735 quote

Our local team follows up with current model and payment options during showroom hours.

4.7+ stars · 180+ Google reviews · Authorized Hot Spring Dealer · Family-owned in East Texas since 1986

Prefer the full quote form? Continue with 735 selected →

GET PRICINGBUYER'S GUIDESTEST SOAKBACKYARD VISITTRADE-INSFINANCING